LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Steering System) >> Unit Disassembly And Assembly >> Steering Gear And Linkage >> Disassembly and Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cylinder tubes from the gear housing assembly.
  2. Loosen the lock nuts of the outer sockets, then remove the outer sockets from the inner sockets.
  3. Remove the boot clamps from the boots, then remove the boots from the inner sockets and gear housing assembly.
    CAUTION:
    • Do not reuse the large-diameter boot clamps.
    • Do not damage the boots, inner socket or gear housing assembly. If they are damaged, replace them.
  4. Remove the inner sockets.
scientia non olet · About LEMON Manuals