ID Registration Without Transmitter Activation Tool
- With the ignition switch in OFF position, connect CONSULT-III to the Data Link Connector (DLC). Turn ignition switch to ON position.
- Turn the ignition switch ON.
- Display the "WORK SUPPORT" screen for "AIR PRESSURE MONITOR" and select "ID REGIST".
- Adjust the tire pressure for all wheels to match the list below, and drive the vehicle at more than 25 mph (40 km/h) for 3 minutes or more. ID Registration Tire Pressure Specifications
Tire Position Tire Pressure - psi (kPa) Front Left 34 (240) Front Right 31 (220) Rear Right 29 (200) Rear Left 26 (180) - After completing the drive, and all IDs are registered, inflate all tires to specification.