DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
: GO TO 2.
- RECHECK DTC
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Turn the steering wheel leftward slowly. Steer until the turning stops.
- Turn the steering wheel rightward slowly. Steer to the straight forward position.
- Perform self-diagnosis for "4WAS(MAIN)/RAS/HICAS".
Is DTC "C1926" or "C1932" detected?
YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Start the engine.