Work Procedure

SAVING VEHICLE SPECIFICATION
-CONSULT Configuration

Perform "Before Replace ECU" to save or print current vehicle specification. Refer to "DESCRIPTION ".

NOTE: If "Before Replace ECU" can not be used, use the "Manual Configuration".

: GO TO 2.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to "REMOVAL AND INSTALLATION ".

: GO TO 3.
WRITING VEHICLE SPECIFICATION
-CONSULT Configuration

Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to "WORK PROCEDURE ".

: GO TO 4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.

: WORK END