LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 x >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System (With Intelligent Key System) >> DTC/Circuit Diagnosis >> DTC B210E: Starter Relay >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

NOTE:
  • If DTC B210E is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B210E is displayed with DTC B2605 (BCM), first perform the trouble diagnosis for DTC B2605. Refer to "DTC LOGIC ".
  • When IPDM E/R power supply voltage is low (Approx. 7 - 8 V for about 1 second), the DTC B210E may be detected.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210E STARTER RELAY OFF When comparing the following items, IPDM E/R detects that starter relay is stuck in the OFF position for 1 second or more.
  • Starter control relay signal (CAN) from BCM
  • Starter relay status signal (CAN) from BCM
  • Starter control relay and starter relay status signal (IPDM E/R input)
  • Starter control relay control signal (IPDM E/R output)
  • P/N position signal input
  • Harness or connectors

    (Starter relay circuit is open or shorted.)

  • Harness or connectors

    (CAN communication line is open or shorted.)

  • IPDM E/R 
  • Battery
  • BCM
scientia non olet · About LEMON Manuals