April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Flow

Fig 1: Identifying Theft Warning Alarm Operation Flow Chart

G06936224

Courtesy of NISSAN NORTH AMERICA, INC.

No.	System state	Switching condition
1	DISARMED to PRE-ARMED	When all conditions of A and one condition of B is satisfied.	A	B
1	DISARMED to PRE-ARMED		Power supply position: OFF/LOCK All doors: Closed Hood: Closed Trunk lid: Closed	All doors are locked by: Door key cylinder LOCK switch LOCK button of Intelligent Key Door request switch
2	PRE-ARMED to ARMED	When none of the following conditions are satisfied for 30 seconds.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON UNLOCK switch of door lock and unlock switch: ON Any door: Open Hood: Open Trunk lid: Open
3	ARMED to ALARM	When one condition of A and one condition of B are satisfied.	A	B
3	ARMED to ALARM		Intelligent Key: Not used	Any door: Open Hood: Open Trunk lid: Open
4	DISARMED to PRE-RESET	When all conditions of A and one condition of B is satisfied.	A	B
4	DISARMED to PRE-RESET		Power supply position: OFF/LOCK All doors: Closed Hood and/or Trunk lid: Open	All doors are locked by: Door key cylinder LOCK switch LOCK button of Intelligent Key Door request switch
5	PRE-ARMED to PRE-RESET	When one of the following conditions is satisfied.	Hood: Open Trunk lid: Open
6	ARMED to PRE-RESET	When one of the following conditions is satisfied.	Trunk key cylinder switch: ON Trunk lid opener request switch: ON TRUNK OPEN button of Intelligent Key: ON
7	ALARM to PRE-RESET	When one of the following conditions is satisfied.
8	PRE-RESET to DISARMED	When one of the following conditions is satisfied.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON UNLOCK switch of door lock and unlock switch: ON Any door: Open
9	PRE-RESET to PRE-ARMED	When all conditions of A are satisfied, and all conditions of B are satisfied.	A	B
9	PRE-RESET to PRE-ARMED		Power supply position: OFF/LOCK All doors: Closed	Hood: Closed Trunk lid: Closed
10	PRE-ARMED to DISARMED	When one of the following condition is satisfied.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON Any door: Open
11	ARMED to DISARMED	When one of the following condition is satisfied.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON
12	ALARM to DISARMED	When one of the following condition is satisfied.
13	RE-ALARM	When one of the following condition is satisfied after the ALARM operation is finished.	Any door: Open Hood: Open Trunk lid: Open

NOTE:

BCM ignores the door key cylinder UNLOCK switch signal input for 1 second after the door key cylinder LOCK switch signal input.
To lock/unlock all doors or trunk lid by operating remote controller button of Intelligent Key or door/trunk lid request switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to "DOOR LOCK FUNCTION: SYSTEM DESCRIPTION ".