LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Power Control System (Power Distribution System)) >> DTC/Circuit Diagnosis >> DTC B2616: Ignition Relay Circuit >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK IGNITION RELAY 
    1. Turn ignition switch OFF.
    2. Remove ignition relay.
    3. Check the continuity between ignition relay terminals.
      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace Ignition relay

      Fig 1: Identifying Relay Terminals
      G07129475Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals