LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Power Control System (Power Distribution System)) >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front body side welt. Refer to "BODY SIDE WELT: REMOVAL AND INSTALLATION ".
  2. Remove instrument side finisher LH. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove instrument lower panel LH. Refer to "REMOVAL AND INSTALLATION ".
  4. Disconnect NATS antenna amp. connector and push-button ignition switch connector.
  5. Disengage the NATS antenna amp. fixing pawls while pushing NATS antenna amp. from its back side, so that NATS antenna amp. and push-button ignition switch are lifted up from instrument panel assembly.
    Fig 1: Removing NATS Antenna Amp.
    G08892116Courtesy of NISSAN NORTH AMERICA, INC.
  6. While pushing the push-button ignition switch from its back side, disengage the push-button ignition switch fixing pawls and then remove push-button ignition switch.
    Fig 2: Removing Push-Button Ignition Switch
    G08892117Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals