DTC Confirmation Procedure
- PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
Which DTC is detected?
P0102: GO TO 2.
P0103: GO TO 3.
- PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0102
- Start engine and wait at least 5 seconds.
- Check DTC.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0103-I
- Turn ignition switch ON and wait at least 5 seconds.
- Check DTC.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: GO TO 4.
- PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0103-II
- Start engine and wait at least 5 seconds.
- Check DTC.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END