Consult-III Application Items
DIAGNOSTIC TEST MODE FUNCTION CHART
| Diagnostic test mode | Function |
|---|---|
| Work Support | This mode enables a technician to adjust some devices faster and more accurately. |
| Self Diagnostic | Results Retrieve DTC from ECU and display diagnostic items. |
| Data Monitor | Monitor the input/output signal of the control unit in real time. |
| CAN Diagnosis | This mode displays a network diagnosis result about CAN by a diagram. |
| CAN Diagnostic Support Monitor | It monitors the status of CAN communication. |
| ECU Identification | Display the ECU identification number (part number etc.) of the selected system. |
| Active Test | Send the drive signal from CONSULT-III to the actuator. The operation check can be performed. |