Special Repair Requirement

1. Park the vehicle on a flat road.
2. Adjust pressure in all tires to the specified value. Refer to "TIRE AIR PRESSURE ".

   : GO TO 2.

With CONSULT 

1. Turn ignition switch ON.
   CAUTION: Never start the engine.
2. Select "G SENSOR CALIBRATION" in "Work Support" in "TRANSMISSION".
3. Touch "START".
   CAUTION: Never give any motion to the vehicle during the calibration.

   Is "completed" displayed? 

   YES: GO TO 3.

   NO: Perform the calibration again.

With CONSULT 

1. Turn ignition switch OFF and wait 10 seconds or more:
2. Turn ignition switch ON.
3. Select "Self Diagnostic Results" in "ABS".

   Is "C1145" or "C1146" detected? 

   YES: Refer to "DTC INDEX ".

   NO: WORK END