LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Unit Disassembly And Assembly >> Front Drive Shaft And Drive Chain >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Drive Shaft And Drive Chain: Assembly

  1. Install plug to front drive shaft.
    CAUTION: Never reuse plug.
  2. Install front drive shaft front bearing with the drift (A) [SST: ST33200000 (J-26082)].
    Fig 1: Installing Front Drive Shaft Bearing Using Drift
    G05979454Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install front drive shaft rear bearing with the drift (A) [SST: KV38104010 (-)].
    Fig 2: Installing Front Drive Shaft Rear Bearing Using Drift
    G05979455Courtesy of NISSAN NORTH AMERICA, INC.
  4. Set drive chain to front drive shaft.
    CAUTION: Identification mark (A) of drive chain should be in the side of front bearing (1) of front drive shaft.
  5. Install drive chain to main shaft, and then install front drive shaft.
    CAUTION: Never use tools. Always install by hand.
  6. Install front case to rear case. Refer to "ASSEMBLY ".
    Fig 3: Identifying Identification Mark On Front Bearing
    G05727203Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals