Detailed Flow

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".

: GO TO 2.
CHECK SYMPTOM 1
Check the following items based on the information obtained from the customer.
- Fail-safe. Refer to "FAIL-SAFE ".
- A/T fluid inspection. Refer to "CHECKING THE A/T FLUID (ATF) ".
- Stall test. Refer to "STALL TEST ".
- Line pressure test. Refer to "LINE PRESSURE TEST ".
  : GO TO 3.
CHECK DTC
1. Check DTC.
2. Perform the following procedure if DTC is detected.
  - Record DTC.
  - Erase DTC. Refer to "OBD-II Diagnostic Trouble Code (DTC) ".
    Is any DTC detected?
    
    YES: GO TO 4.
    
    NO: GO TO 6.
PERFORM DIAGNOSTIC PROCEDURE
Perform "Diagnosis Procedure" for the displayed DTC.

: GO TO 5.
PERFORM DTC CONFIRMATION PROCEDURE
Perform "DTC CONFIRMATION PROCEDURE".

Is DTC detected?

YES: GO TO 4.

NO: GO TO 6.
CHECK SYMPTOM 2
Try to confirm the symptom described by the customer.

Is any malfunction present?

YES: GO TO 7.

NO: INSPECTION END
ROAD TEST
Perform "ROAD TEST". Refer to "CHECK BEFORE ENGINE IS STARTED ".

: GO TO 8.
CHECK SYMPTOM 3
Try to confirm the symptom described by the customer.

Is any malfunction present?

YES: GO TO 2.

NO: INSPECTION END