Section 13 (Automatic Transmission)
WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- Basic Inspection
- System Description
- A/T Control System
- A/T Shift Lock System
- On Board Diagnostic (OBD) System
- Diagnosis System (TCM)
- DTC/Circuit Diagnosis
- DTC Index
- DTC U0100: Lost Communication (ECM A)
- DTC U1000: Can Comm Circuit
- DTC P0615: Starter Relay
- DTC P0700: Transmission Control
- DTC P0705: Transmission Range Sensor A
- DTC P0717: Input Speed Sensor A
- DTC P0720: Output Speed Sensor
- DTC P0725: Engine Speed
- DTC P0731: 1GR Incorrect Ratio
- DTC P0732: 2GR Incorrect Ratio
- DTC P0733: 3GR Incorrect Ratio
- DTC P0734: 4GR Incorrect Ratio
- DTC P0735: 5GR Incorrect Ratio
- DTC P0740: Torque Converter
- DTC P0744: Torque Converter
- DTC P0745: Pressure Control Solenoid A
- DTC P1705: TP Sensor
- DTC P1710: Transmission Fluid Temperature Sensor
- DTC P1721: Vehicle Speed Signal
- DTC P1730: Interlock
- DTC P1731: 1ST Engine Braking
- DTC P1752: Input Clutch Solenoid
- DTC P1757: Front Brake Solenoid
- DTC P1762: Direct Clutch Solenoid
- DTC P1767: High And Low Reverse Clutch Solenoid
- DTC P1772: Low Coast Brake Solenoid
- DTC P1774: Low Coast Brake Solenoid
- Main Power Supply And Ground Circuit
- Closed Throttle Position And Wide Open Throttle Position Circuit
- Brake Signal Circuit
- A/T Shift Lock System
- Overdrive Control Switch
- 1ST Position Switch
- Ecu Diagnosis Information
- TCM
- Reference Value
- Fail-Safe
- Notes
- Fail-Safe Function
- Notes
- Output Speed Sensor
- Accelerator Pedal Position Sensor
- Throttle Position Sensor
- Transmission Range Switch
- Starter Relay
- Interlock
- 1st Engine Braking
- Line Pressure Solenoid
- Torque Converter Clutch Solenoid
- Low Coast Brake Solenoid
- Input Clutch Solenoid
- Direct Clutch Solenoid
- Front Brake Solenoid
- High and Low Reverse Clutch Solenoid
- Input Speed Sensor 1 or 2
- DTC Inspection Priority Chart
- DTC No. Index
- TCM
- Wiring Diagram
- Symptom Diagnosis
- Precaution
- Preparation
- Periodic Maintenance
- Removal And Installation
- Unit Removal And Installation
- Unit Disassembly And Assembly
- Service Data And Specifications (SDS)