LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Intelligent Cruise Control System (ICC) (Convertible) >> DTC/Circuit Diagnosis >> DTC C1A14: ECM >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

DTC (On board display) Trouble diagnosis name DTC detecting condition Possible causes
C1A14 (14) ECM CIRCUIT If ECM is malfunctioning
  • Accelerator pedal position sensor
  • ECM
  • ICC sensor integrated unit
NOTE: If DTC "C1A14" is detected along with DTC "U1000", first diagnose the DTC "U1000". Refer to "DTC LOGIC ".
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine.
    2. Operate the ICC system and drive.
      CAUTION: Always drive safely.
    3. Stop the vehicle.
    4. Perform "All DTC Reading" with CONSULT.
    5. Check if the "C1A14" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

      Is "C1A14" detected as the current malfunction? 

      YES: Refer to "DIAGNOSIS PROCEDURE ".

      NO: Refer to "INTERMITTENT INCIDENT ".