LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Sonar System (Convertible) >> System Description >> Diagnosis System (Sonar Control Unit) >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
Monitor Item Display Description
REAR BUZZER On Buzzer output condition.
Off Buzzer non-output condition.
REVERSE RANGE On Shift the selector lever to R position.
Off Shift the selector lever other than R position.
CANCEL SW On While pressing the sonar cancel switch.
Off Other than above.
CANCEL SW IND On When sonar cancel switch indicator lamp is ON.
Blink When sonar cancel switch indicator lamp is blinking.
Off When sonar cancel switch indicator lamp is OFF.
CR SEN [RL]
CR SEN [RR]
ERROR When a sensor is abnormal.
LV.0 When a sensor is not detection.
LV.2 The distance between the center sensor and an obstacle is 50 cm (19.6 in) or more and less then 60 cm (23.6 in).
LV.3 The distance between the center sensor and an obstacle is 30 cm (11.8 in) or more and less then 50 cm (19.6 in).
LV.4 The distance between center sensor and an obstacle less than 30 cm (11.8 in).
CTR SEN [RL]
CTR SEN [RR]
ERROR When a sensor is abnormal.
LV.0 When a sensor is not detection.
LV.1 The distance between the center sensor and an obstacle is 60 cm (23.6 in) or more and less then 100 cm (39.3 in).
LV.2 The distance between the center sensor and an obstacle is 50 cm (19.6 in) or more and less then 60 cm (23.6 in).
LV.3 The distance between the center sensor and an obstacle is 30 cm (11.8 in) or more and less then 50 cm (19.6 in).
LV.4 The distance between center sensor and an obstacle less than 30 cm (11.8 in).
DISPLAY INFO On Icon display indication condition.
Off Icon display non-indication condition.