Physical Values

Terminal (Wire color)		Description		Condition		Reference value (Approx.)
+	-	Signal name	Input/Output	Condition		Reference value (Approx.)
1 (B)	Ground	Ground	-	Ignition switch ON	-	0 V
2 (Y)	Ground	Inverter VCC	Input	Ignition switch ACC	-	9.0 V
3 (BG)	Ground	Signal VCC	Input	Ignition switch ACC	-	9.0 V
4 (V)	Ground	Composite image ground	-	Ignition switch ON	-	0 V
5	-	Shield	-	-	-	-
6 (L)	Ground	RGB signal (G: green)	Input	Ignition switch ON	Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen.
7	-	Shield	-	-	-	-
8 (R)	Ground	Horizontal synchronizing (HP) signal	Output	Ignition switch ON	-
9 (B)	Ground	RGB area (YS) signal	Input	Ignition switch ON	At RGB image is displayed.	5.0 V
9 (B)	Ground	RGB area (YS) signal	Input	Ignition switch ON	At DVD image is displayed.
11 (P)	Ground	Communication signal (CONT→DISP)	Input	Ignition switch ON	When adjusting display brightness.
13 (BR)	Ground	Inverter ground	-	Ignition switch ON	-	0 V
14 (LG)	Ground	Signal ground	-	Ignition switch ON	-	0 V
15 (SB)	Ground	Composite image signal	Input	Ignition switch ON	At rear view camera image is displayed.
17 (G)	Ground	RGB signal (R: red)	Input	Ignition switch ON	Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen.
18 (P)	Ground	RGB signal (B: blue)	Input	Ignition switch ON	Start Confirmation/Adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on Display Diagnosis screen.
19 (W)	Ground	RGB synchronizing signal	Input	Ignition switch ON	-
20 (G)	Ground	Vertical synchronizing (VP) signal	Output	Ignition switch On	-
21	-	Shield	-	-	-	-
22 (L)	Ground	Communication signal (DISP→CONT)	Output	Ignition switch ON	When adjusting display brightness.
23	-	Shield	-	-	-	-