LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio, Visual & Navigation System (Base Audio Without Navigation) (Convertible) >> DTC/Circuit Diagnosis >> RGB Area (YS) Signal Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect display unit connector and AV control unit connector.
    3. Check continuity between display unit harness connector and AV control unit harness connector.
      Display unit AV control unit Continuity
      Connector Terminal Connector Terminal
      M71 9 M202 40 Existed
    4. Check continuity between display unit harness connector and ground.
      Display unit Ground Continuity
      Connector Terminal
      M71 9 Not existed

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair harness or connector.

  2. CHECK RGB AREA (YS) SIGNAL 
    1. Connect display unit connector and AV control unit connector.
    2. Turn ignition switch ON.
    3. Check signal between display unit harness connector and ground.
      (+) (-) Condition Reference value (Approx.)
      Display unit
      Connector Terminal
      M71 9 Ground At RGB image is displayed. 5.0 V
      At camera image is displayed.
      G05219862

      Is the inspection result normal? 

      YES: Replace display unit. Refer to "EXPLODED VIEW ".

      NO: Replace AV control unit. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals