AV CONTROL UNIT: Diagnosis Procedure
- CHECK FUSE
Check for blown fuses.
Power source Fuse No. Battery 34 Ignition switch ACC or ON 19 Is the inspection result normal?
YES: GO TO 2.
NO: Be sure to eliminate cause of malfunction before installing new fuse.
- CHECK POWER SUPPLY CIRCUIT
Check voltage between AV control unit harness connectors and ground.
Signal name Connector No. Terminal No. Ignition switch position Value (Approx.) Battery power supply M201 19 OFF Battery voltage ACC power supply M201 7 ACC Battery voltage Is the inspection result normal?
YES: GO TO 3.
NO: Check harness between AV control unit and fuse.
- CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect AV control unit connectors.
- Check continuity between AV control unit harness connectors and ground.
Signal name Connector No. Terminal No. Ignition switch position Continuity Ground M201 20 OFF Existed Is the inspection result normal?
YES: INSPECTION END
NO: Repair harness or connector.