LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (Convertible) >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT.
    3. Check the power walk-in switch signal under the following condition.
      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals