Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| CONSULT display | Description | |
|---|---|---|
| Item | Indication/Unit | |
| LATCH OUT (ULK) | ON/OFF/NG | OPEN output state to roof latch motor is displayed |
| LATCH OUT (LCK) | ON/OFF/NG | CLOSE output state to roof latch motor is displayed |
| LATCH VALUE | 0-255 | Pulse number from roof latch status sensor is displayed |
| LATCH LIMIT SW | LOCK/UNLK | Input state of roof latch limit switch is displayed |
| LATCH STATE | NG/CLOSE/MID/OPEN | State of roof latch is displayed |
| PS VALUE (DRAW) | 0-65535 | Pulse number from parcel shelf status sensor (DRAW) is displayed |
| PS VALUE (ROTA) | 0-65535 | Pulse number from parcel shelf status sensor (ROTATE) is displayed |
| PS OUT (UP) | ON/OFF/NG | UP output state to parcel shelf motor (DRAW) is displayed |
| PS OUT (DOWN) | ON/OFF/NG | DOWN output state to parcel shelf motor (DRAW) is displayed |
| PS OUT (VERT) | ON/OFF/NG | VERTICAL output state to parcel shelf motor (ROTATE) is displayed |
| PS OUT (HORI) | ON/OFF/NG | HORIZONTAL output state to parcel shelf motor (ROTATE) is displayed |
| PS STATE (DRAW) | NG/1-6 | DRAW state of parcel shelf is displayed |
| PS STATE (ROTA) | NG/1-4 | ROTATE state of parcel shelf is displayed |
| ROOF VALUE | 0-1023 | Pulse number from roof status sensor is displayed |
| PUMP OUT (RH) | ON/OFF/NG | Right rotation output state to hydraulic motor is displayed |
| PUMP OUT (LH) | ON/OFF/NG | Left rotation output state to hydraulic motor is displayed |
| SWITCH VLV 1 OUT | ON/OFF/NG | Output state to switching valve 1 is displayed |
| SWITCH VLV 2 OUT | ON/OFF/NG | Output state to switching valve 2 is displayed |
| ROOF STATE | NG/1-42 | State of retractable hard top system is displayed |
| HYDRAULIC STATE | NG/1-22 | State of hydraulic system is displayed |
| ROOF SW (OPEN) | ON/OFF | OPEN input state of roof open/close switch is displayed |
| ROOF SW (CLOSE) | ON/OFF | CLOSE input state of roof open/close switch is displayed |
| ROOF LINK STATE | NG/1-8 | State of roof link is displayed |
| TRUNK LINK SEN (RH) | ON/OFF/NG | Input state of trunk link sensor (RH) is displayed |
| TRUNK LINK SEN (LH) | ON/OFF/NG | Input state of trunk link sensor (LH) is displayed |
| TR ROOM LAMP SW | ON/OFF | Input state from trunk room lamp switch is displayed |
| TRUNK STATUS SEN | ON/OFF/NG | Input state of trunk status sensor is displayed |
| TRUNK OPEN OUT | ON/OFF/NG | OPEN output state to trunk opener actuator is displayed |
| FLPD LIMIT SW (DWN) | ON/OFF | Input state of flipper door limit switch (DOWN) is displayed |
| FLPD LIMIT SW (UP) | ON/OFF | Input state of flipper door limit switch (UP) is displayed |
| FLPD OUT (UP) | ON/OFF/NG | UP output state to flipper door motor (LH/RH) is displayed |
| FLPD OUT (DWN) | ON/OFF/NG | DOWN output state to flipper door motor (LH/RH) is displayed |
| FLPD STATE | NG/1, 2, 4 | State of flipper door (LH/RH) is displayed |
| R WIN LH OUT (UP) | ON/OFF/NG | CLOSE output state to rear power window motor (LH) is displayed |
| R WIN LH OUT (DWN) | ON/OFF/NG | OPEN output state to rear power window motor (LH) is displayed |
| R WIN RH OUT (UP) | ON/OFF/NG | CLOSE output state to rear power window motor (RH) is displayed |
| R WIN RH OUT (DWN) | ON/OFF/NG | OPEN output state to rear power window motor (RH) is displayed |
| REAR DEF ON SIG | ON/OFF | Input state of rear window defogger ON signal from BCM is displayed |
| REAR DEF OUT | ON/OFF/NG | Output state to rear window defogger is displayed |
| R WIN CURENT (LH) | 0-25.5 | Current value to rear power window motor (LH) is displayed |
| R WIN CURENT (RH) | 0-25.5 | Current value to rear power window motor (RH) is displayed |
| RR WIN STATE (LH) | UP/MID/DOWN | State of rear power window motor (LH) is displayed |
| RR WIN STATE (RH) | UP/MID/DOWN | State of rear power window motor (RH) is displayed |
| RAP SIGNAL | ON/OFF | Input state of RAP signal from BCM is displayed |
| TR MODE SIGNAL | ON/OFF | Output state of trunk mode signal to trunk closure control unit is displayed |
| ROOF STATE (AUDIO) | ON/OFF/NG | Output state of roof status signal to audio unit is displayed |
| ROOF BUZZER OUT | ON/OFF/NG | Out put state to roof warning buzzer is displayed |
| LOCAL COMM 1 | NG/SLEEP/NG | State of serial link 1 is displayed |
| LOCAL COMM 2 | NG/SLEEP/NG | State of serial link 2 is displayed |
| ROOF MODE | NG/STOP/CLOSE/OK | Inhibition mode of retractable hard top system is displayed |
| POP-UP BAR DPLOY | OK/NG | It is displayed whether or not pop-up bar is deployed |
| POP-UP BAR DIAG | OK/NG | It is displayed whether or not pop-up bar is malfunctioning |
| SWITCH VLV COND | OK/NG | Diagnosis result of switching valve is displayed |
| PWR SOURCE COND | OK/NG | Diagnosis result of battery power supply is displayed |
| CPU COND | OK/NG | Diagnosis result of CPU is displayed |
| ROOF COND | OK/NG | Diagnosis result of roof position is displayed |
| SENSOR COND | OK/NG | Diagnosis result of sensor (hall sensor) is displayed |
| IGN ON SIG (BCM) | OK/NG | Receiving state of ignition ON signal from BCM is displayed |
| VHCL STOP-METER | OK/NG | Receiving state of vehicle speed (0 km/h) from combination meter is displayed |
| CIRCUIT COND | OK/NG | Diagnosis result of circuit is displayed |
| ROOF TIMEOUT | OK/NG | Time out state of roof operation is displayed |
| CAN COMM | OK/NG | Diagnosis result of CAN communication is displayed |
| THERMO PROTECT 1 | OK/NG | Non-operation state of thermo protection (stage1) is displayed |
| PRMIT ENG ST (BCM) | OK/NG | Input state of engine cranking signal from BCM is displayed |
| SHIFT R SIG | OK/NG | Input state of shift position (R position) is displayed |
| THERMO PROTECT 2 | OK/NG | Non-operation state of thermo protection (stage 2) is displayed |
| TONNEAU SW | OK/NG | State of tonneau board switch is displayed |
| BRK LAMP SW (BCM) | OK/NG | Receiving state of brake lamp switch signal from BCM is displayed |
| THERMO VALUE | 0-65535 | Count value of thermo protection is displayed |
| PWR SOURCE VALUE | 0-20 | Voltage value of power supply is displayed |
| ROOF INITIAL (OPEN) | OK/NG | Learning state of roof position (OPEN) is displayed |
| ROOF INITIAL (CLOSE) | OK/NG | Learning state of roof position (CLOSE) is displayed |
| PSHELF INITIAL (ROTA) | OK/NG | Learning state of parcel shelf position (ROTATE) is displayed |
| PSHELF INITIAL (DRAW) | OK/NG | Learning position of parcel shelf position (DRAW) is displayed |