LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner (Convertible) >> DTC/Circuit Diagnosis >> Door Mirror Remote Control Switch >> Mirror Switch >> MIRROR SWITCH: Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MIRROR SWITCH: Component Function Check

  1. CHECK MIRROR SWITCH FUNCTION 
    1. Turn ignition switch ON.
    2. Select "MIR CON SW-UP/DN", "MIR CON SW-RH/LH" in the "DATA MONITOR" mode using CONSULT.
    3. Check mirror switch signal under the following conditions.
      Monitor item Condition Status
      MIR CON SW-UP/DN When operating the mirror switch up or down side. ON
      Other than above. OFF
      MIR CON SW-RH/LH When operating the mirror switch right or left side. ON
      Other than above. OFF

      Is the inspection result normal? 

      YES: Mirror switch function is OK.

      NO: Perform diagnosis procedure. Refer to "MIRROR SWITCH: DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals