LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner (Convertible) >> DTC/Circuit Diagnosis >> Lifting Switch (Front) >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "LIFT FR SW-UP", "LIFT FR SW-DN" in the "Data monitor" mode using CONSULT.
    3. Check lifting switch (front) signal under the following conditions.
      Monitor item Condition Status
      LIFT FR SW-UP Lifting switch front (up) Operate ON
      Release OFF
      LIFT FR SW-DN Lifting switch front (down) Operate ON
      Release OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals