LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner (Convertible) >> Ecu Diagnosis Information >> Driver Seat Control Unit (With Automatic Drive Positioner) >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

Terminal No. (Wire color) Description Condition Voltage (V) (Approx)
+ - Signal name Input/Output
1 (L/W) Ground UART communication (RX) Input Ignition switch ON
G05223233
3 (R/Y) - CAN-H - - -
4 (O/B) Ground Sliding limit switch signal Input Seat sliding front edge 0
Seat switch & power walk-in switch is pressed 5
5 (L) Ground Seat belt buckle switch signal (driver side) Input Seat belt fastened & seat switch pressed 5
Other than above 0
8 (L/Y) Ground Parking brake switch signal Input Parking brake Applied 0
Release Battery voltage
9 (W/G) Ground Reclining sensor signal Input Seat reclining Operate
G05223234
Stop 0 or 5
10 (P/B) Ground Lifting sensor (rear) signal Input Seat lifting (rear) Operate
G05223234
Stop 0 or 5
11 (BR) Ground Sliding switch backward signal Input Sliding switch Operate (backward) 0
Release Battery voltage
12 (SB) Ground Reclining switch backward signal Input Reclining switch Operate (backward) 0
Release Battery voltage
13 (LG/R) Ground Lifting switch (front) downward signal Input Lifting switch (front) Operate (downward) 0
Release Battery voltage
14 (GB) Ground Lifting switch (rear) downward signal Input Lifting switch (rear) Operate (downward) 0
Release Battery voltage
16 (O) Ground Sensor power supply Output - Battery voltage
17 (Y/R) Ground UART communication (TX) Output Ignition switch ON
G05223236
19 (V) - CAN-L - - -
21 (L/Y) Ground Detention switch Input A/T selector lever P position 0
Except P position
G05223237
24 (R) Ground Sliding sensor signal Input Seat sliding Operate
G05223234
Stop 0 or 5
25 (Y/B) Ground Lifting sensor (front) signal Input Seat lifting (front) Operate
G05223234
Stop 0 or 5
26 (Y) Ground Sliding switch forward signal Input Sliding switch Operate (forward) 0
Release Battery voltage
27 (R/G) Ground Reclining switch forward signal Input Reclining switch Operate (forward) 0
Release Battery voltage
28 (W/B) Ground Lifting switch (front) upward signal Input Seat lifting switch (front) Operate (upward) 0
Release Battery voltage
29 (P/L) Ground Lifting switch (rear) upward signal Input Seat lifting switch (rear) Operate (upward) 0
Release Battery voltage
30 (P) Ground Power walk-in switch signal Input Power walk-in switch Pressed 0
Other than above Battery voltage
31 (GR) Ground Sensor ground - - 0
32 (B/W) Ground Ground (signal) - - 0
33 (R) Ground Power source (C/B) Input - Battery voltage
35 (W/R) Ground Sliding motor forward output Output Seat sliding Operate (forward) Battery voltage
Release 0
36 (G/Y) Ground Reclining motor forward output signal Output Seat reclining Operate (forward) Battery voltage
Release 0
37 (G/W) Ground Lifting motor (front) downward output Output Seat lifting (front) Operate (downward) Battery voltage
Stop 0
38 (L/Y) Ground Lifting motor (rear) upward output Output Seat lifting (rear) Operate (upward) Battery voltage
Stop 0
39 (R/B) Ground Lifting motor (rear) downward output Output Seat lifting (rear) Operate (downward) Battery voltage
Stop 0
40 (R/W) Ground Power source (Fuse) Input - Battery voltage
41 (Y/G) Ground Forward switch signal Input Seat back is folded down and power walk-in switch pressed 0
Seat back is fold up and seat reclining is operation battery voltage
Seat back is fold up and power walk-in switch is pressed 5
42 (W) Ground Sliding motor backward output Output Seat sliding Operate (backward) Battery voltage
Stop 0
44 (P) Ground Reclining motor backward output Output Seat reclining Operate (backward) Battery voltage
Stop 0
45 (L/R) Ground Lifting motor (front) upward output Output Seat lifting (front) Operate (upward) Battery voltage
Stop 0
48 (B) Ground Ground (power) - - 0