LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner (Convertible) >> System Description >> Automatic Drive Positioner System >> Seat Synchronization Function >> SEAT SYNCHRONIZATION FUNCTION: System Description >> Detail Flow
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Detail Flow

When performing the sliding, reclining or lifting (rear) operation in manual function, the driver seat control unit performs the seat synchronization function as follows.

Order Input Output Control unit condition
1 Sensors [Sliding, reclining, lifting (rear)] - The driver seat control unit judges the direction and distance of seat movement according to the signal input from each seat sensor during manual operation.
2 - Motors (Tilt, telescopic, outside mirror) Driver seat control unit requests the operation to position according to the direction and distance of seat movement to the automatic drive positioner control unit via UART communication. The automatic drive positioner control unit operates each motor.
Sensors (Tilt, telescopic, outside mirror) - Driver seat control unit stops the operation of each motor when the value of each sensor that is input to automatic drive positioner control unit via UART communication reaches the target address.
scientia non olet · About LEMON Manuals