LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seats (Convertible) >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Driver Side >> DRIVER SIDE: Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DRIVER SIDE: Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT.
    3. Check the power walk-in switch signal under the following condition.
      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: Power walk-in switch function is OK.

      NO: Refer to "DRIVER SIDE: DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals