LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seats (Convertible) >> DTC/Circuit Diagnosis >> Sliding Sensor >> Driver Side >> DRIVER SIDE: Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DRIVER SIDE: Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "SLIDE PULSE" in the "Data Monitor" mode using CONSULT.
    3. Check sliding sensor signal under the following conditions.
      Test item Condition Status
      SLIDE PULSE Seat sliding Operate (forward) Change (increase)(1)
      Operate (backward) Change (decrease)(1)
      Release No change(1)
      (1) The value at the seat position attained when the battery is connected is considered to be 32768.

      Is the indication normal? 

      YES: Sliding sensor function is OK.

      NO: Refer to "DRIVER SIDE: DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals