LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System (VDC/TCS/Abs) (Convertible) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. BRAKE WARNING LAMP OPERATION CHECK 1 

    Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

  2. BRAKE WARNING LAMP OPERATION CHECK 2 

    Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the parking brake lever (M/T) or the parking brake pedal (A/T).

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Check the parking brake switch. Refer to "COMPONENT INSPECTION ".

scientia non olet · About LEMON Manuals