LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - DTCS P1233 To P2138 (Convertible) >> DTC P1564: ICC Steering Switch >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. CHECK ICC STEERING SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect combination switch (spiral cable) harness connector M303.
    3. Check resistance between combination switch harness connector terminals under the following conditions.
      Combination switch Condition Resistance (Ω)
      Connector Terminals
      M303 13 and 16 MAIN switch: Pressed Approx. 0
      CANCEL switch: Pressed Approx. 310
      DISTANCE switch: Pressed Approx. 740
      SET/COAST switch: Pressed Approx. 1, 400
      RESUME/ACCELERATE switch: Pressed Approx. 2, 600
      All ICC steering switches: Released Approx. 5, 500

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace ICC steering switch. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals