Diagnostic Procedure

CHECK HARNESS CONNECTOR
Check the connection of harness connector.

Is the inspection result normal?

YES: GO TO 2.

NO: Replace harness connectors.
CHECK WIRING HARNESS
Check the wiring harness externals.

Is the inspection result normal?

YES: GO TO 3.

NO: Replace wiring harness.
CHECK OCCUPANT CLASSIFICATION SYSTEM CONTROL UNIT
1. Replace passenger seat cushion assembly. Refer to "EXPLODED VIEW ".
2. Perform DTC confirmation procedure. Refer to "DTC LOGIC ".
  Is DTC detected?
  
  YES: GO TO 4.
  
  NO: INSPECTION END
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace air bag diagnosis sensor unit. Refer to "EXPLODED VIEW ".
2. Perform DTC confirmation procedure. Refer to "DTC LOGIC ".
  Is DTC detected?
  
  YES: GO TO 1.
  
  NO: INSPECTION END