LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Seat Belt Control System (Convertible) >> DTC/Circuit Diagnosis >> Seat Belt Buckle Switch >> Driver Side >> DRIVER SIDE: Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DRIVER SIDE: Component Inspection

  1. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) 
    1. Turn ignition switch OFF.
    2. Disconnect seat belt buckle switch connector.
    3. Check continuity of seat belt buckle (driver side).
      Seat belt buckle switch (driver side) Condition Continuity
      Terminal
      1 2 When driver side seat belt is not fastened Not existed
      When driver side seat belt is fastened Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace seat belt buckle switch (driver side).

scientia non olet · About LEMON Manuals