Component Inspection (Manual Mode Switch)

CHECK MANUAL MODE SWITCH

Check continuity between A/T shift selector connector terminals.

A/T shift selector connector			Condition	Continuity
Connector	Terminal		Condition	Continuity
M137	1	4	Selector lever is shifted to manual shift gate side	Existed
	1		Other than the above	Not existed
	2		Selector lever is shifted to - side	Existed
	2		Other than the above	Not existed
	3		Selector lever is shifted to + side	Existed
	3		Other than the above	Not existed
	5		Selector lever is shifted to manual shift gate side	Not existed
	5		Other than the above	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace A/T shift selector assembly. Refer to "EXPLODED VIEW ".