Work Procedure

WRITE VEHICLE SPECIFICATION
CONSULT Configuration

Write vehicle specification into AV control unit.

To write vehicle specification stored in CONSULT into the AV control unit: GO TO 2.

To write vehicle specification into the AV control unit by hand: GO TO 3.
WRITE STORED DATA
CONSULT Configuration

Select "After Replace ECU" in "Read/Write Configuration". Write data stored in CONSULT with the "Before Replace ECU" function into the AV control unit.

: GO TO 4.
MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration

Perform "Manual Configuration". Refer to the Configuration List to write vehicle specification into the AV control unit. Refer to "CONFIGURATION LIST ".

NOTE: If selection items are not displayed on the CONSULT screen, touch "NEXT".

: GO TO 4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.

: WORK END