Work Procedure

SAVING TCM DATA
With CONSULT

Save the TCM data according to the CONSULT display.

NOTE: Even when TCM data is not saved in CONSULT, GO TO 2.

: GO TO 2.
REPLACE TRANSMISSION ASSEMBLY
Replace the transmission assembly. Refer to "REMOVAL AND INSTALLATION ".

: GO TO 3.
PERFORM TCM PROGRAMMING
With CONSULT
1. During programming, maintain the following conditions:
2. Perform programming according to the CONSULT display.
  Ignition switch: ON
  
  Selector lever: P
  
  Engine speed: 0 rpm
  
  : WORK END