Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item [Unit] |
MAIN SIGNALS | Description |
|---|---|---|
| RAD FAN REQ [%] |
x | Displays the value of the cooling fan speed signal received from ECM via CAN communication. |
| AC COMP REQ [Off/On] |
x | Displays the status of the A/C compressor request signal received from ECM via CAN communication. |
| TAIL&CLR REQ [Off/On] |
x | Displays the status of the position light request signal received from BCM via CAN communication. |
| HL LO REQ [Off/On] |
x | Displays the status of the low beam request signal received from BCM via CAN communication. |
| HL HI REQ [Off/On] |
x | Displays the status of the high beam request signal received from BCM via CAN communication. |
| FR FOG REQ [Off/On] |
x | Displays the status of the front fog light request signal received from BCM via CAN communication. |
| FR WIP REQ [Stop/1LOW/Low/Hi] |
x | Displays the status of the front wiper request signal received from BCM via CAN communication. |
| WIP AUTO STOP [STOP P/ACT P] |
x | Displays the status of the front wiper auto stop signal judged by IPDM E/R. |
| WIP PROT [Off/BLOCK] |
x | Displays the status of the front wiper fail-safe operation judged by IPDM E/R. |
| IGN RLY1-REQ [Off/On] |
Displays the status of the ignition switch ON signal received from BCM via CAN communication. | |
| IGN RLY [Off/On] |
x | Displays the status of the ignition relay judged by IPDM E/R. |
| PUSH SW [Off/On] |
Displays the status of the push-button ignition switch judged by IPDM E/R. | |
| INTER/NP SW [Off/On] |
Displays the status of the clutch interlock switch (M/T models) or shift position (A/T models) judged by IPDM E/R. | |
| ST RLY CONT [Off/On] |
Displays the status of the starter relay status signal received from BCM via CAN communication. | |
| IHBT RLY-REQ [Off/On] |
Displays the status of the starter control relay signal received from BCM via CAN communication. | |
| ST/INHI RLY [Off/ST ON/INHI ON/UNKWN] |
Displays the status of the starter relay and starter control relay judged by IPDM E/R. | |
| DETENT SW [Off/On] |
Displays the status of the A/T shift selector (detention switch) judged by IPDM E/R. | |
| S/L RLY-REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|
|
| S/L STATE [LOCK/UNLOCK/UNKWN] |
NOTE:
The item is indicated, but not monitored.
|
|
| DTRL REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|
|
| OIL P SW [Open/Close] |
Displays the status of the oil pressure switch judged by IPDM E/R. | |
| HOOD SW [Off/On] |
Displays the status of the hood switch judged by IPDM E/R. | |
| HL WASHER REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|
|
| THFT HRN REQ [Off/On] |
Displays the status of the theft warning horn request signal received from BCM via CAN communication. | |
| HORN CHIRP [Off/On] |
Displays the status of the horn reminder signal received from BCM via CAN communication. | |
| CRNRNG LMP REQ [Off/On] |
NOTE:
The item is indicated, but not monitored.
|