Work Procedure
WARNING: This page is about a different variant/trim than selected.
- STEP 1
- Turn ignition switch ON.
- Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
: GO TO 2.
- STEP 2
Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
: GO TO 3.
- STEP 3
Check that auto-up function operates normally.
: GO TO 4.
- STEP 4
Check anti-pinch function. Refer to "WORK PROCEDURE ".
: END