CONFIGURATION (AV CONTROL UNIT): Work Procedure
- WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit: GO TO 2.
To write vehicle specification into the AV control unit by hand: GO TO 3.
- WRITE STORED DATA
CONSULT Configuration
Select "After Replace ECU" in "Read/Write Configuration". Write data stored in CONSULT with the "Before Replace ECU" function into the AV control unit.
: GO TO 4.
- MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Manual Configuration". Refer to the Configuration List to write vehicle specification into the AV control unit. Refer to "CONFIGURATION (AV CONTROL UNIT): CONFIGURATION LIST ".
NOTE: If selection items are not displayed on the CONSULT screen, touch "NEXT".: GO TO 4.
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
: WORK END