Method Of Starting
- Turn ignition switch to the ON position.
- Turn the headrest display unit OFF.
- Select "L" and press each switch of rear seat remote controller in the order shown below (within 20 seconds after ignition switch is turned ON).
(A): L position
- UP TRIANGLE
- - (VOL DOWN)
- SETUP
- + (VOL UP)
- DOWN TRIANGLE
- POWER
NOTE: Perform the operation of rear seat remote controller for headrest display unit of each side. - When the rear seat remote operation is performed as shown on procedure 3, self-diagnosis screen is displayed.NOTE: Self-diagnosis mode is canceled when pressing the enter switch of rear seat remote controller.