LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> QX80 AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Ecu Diagnosis Information >> Transfer Control Unit >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

Terminal No.
(Wire color)		 Description Condition Value (Approx.)
+ - Signal name Input/Output
6 (BR) Ground Hi-Lo position sensor 1 Input/Output Engine: Running (Never drive the vehicle.) 4WD mode: AUTO or 4H 0 V
4WD mode: Shifting 0 V
4WD mode: 4L 5 V
7 (Y) Ground Transfer fluid temperature sensor power supply Input Engine: Running 0 - 5 V
9 (G) Ground Transfer internal speed sensor (GND) - Always 0 V
10 (Y/G) Ground Transfer internal speed sensor (IMP) Input Ignition switch: ON
  • 4WD mode: AUTO
  • A/T shift selector: N
  • Transfer motor: Driving
G07023525
11 (V) Ground 4WD shift SW (4L) Input Ignition switch: ON 4WD shift switch: 4L Battery voltage
4WD shift switch: Except 4L 0 V
12 (L) - CAN-H Input/Output - -
13 (P) - CAN-L Input/Output - -
14 (W/R) Ground 4WD shift SW (AUTO) Input Ignition switch: ON 4WD shift switch: AUTO Battery voltage
4WD shift switch: Except AUTO 0 V
15 (P/B) Ground Transfer rotary position sensor (PWM) Input Ignition switch: ON
  • 4WD mode: AUTO
  • A/T shift selector: N
G07023526
16 (LG) Ground Transfer rotary position sensor (GND) - Always 0 V
17 (W/L) Ground Transfer lock position sensor power supply Input Ignition switch: ON 5 V
10 seconds or more later after ignition switch turned OFF 0 V
18 (BR/Y) Ground Transfer rotary position sensor power supply Input Ignition switch: ON 5 V
10 seconds or more later after ignition switch turned OFF 0 V
20 (GR) Ground Transfer control unit power supply Input Always Battery voltage
25 (P/L) Ground Hi-Lo position sensor 3 Input/Output Engine: Running (Never drive the vehicle.) 4WD mode: AUTO or 4H 0 V
4WD mode: Shifting 5 V
4WD mode: 4L 5 V
28 (W) Ground Transfer motor temperature sensor power supply Input Ignition switch: ON 0 - 5 V
Ignition switch: OFF 0 V
29 (LG/R) Ground Hi-Lo position sensor 2 Input/Output Engine: Running (Never drive the vehicle.) Always 0 V
30 (R/B) Ground Transfer lock position sensor (GND) - Always 0 V
31 (L/O) Ground Transfer internal speed sensor (DIR) Input Ignition switch: ON
  • 4WD mode: AUTO
  • A/T shift selector: N
  • When changing the transfer motor rotation direction.
G07023527
32 (BR/R) Ground Ignition switch Input Ignition switch: ON Battery voltage
Ignition switch: OFF 0 V
35 (R) Ground 4WD shift SW (4H) Input Ignition switch: ON 4WD shift switch: 4H Battery voltage
4WD shift switch: Except 4H 0 V
36 (L/R) Ground Transfer fluid temperature sensor (GND) - Always 0 V
38 (G/O) Ground Transfer lock position sensor signal Input Ignition switch: ON
  • 4WD mode: AUTO
  • A/T shift selector: N
G07023526
39 (R/W) Ground Transfer internal speed sensor power supply Input Ignition switch: ON 8 V
Ignition switch: OFF 0 V
41 (W/R) Ground Transfer control actuator power supply Input Always Battery voltage
43 (G/R) Ground Motor drive B Input/Output Transfer motor: Driving 0 V - Battery voltage
44 (B) Ground GND - Always 0 V
45 (G/Y) Ground Motor drive A Input/Output Transfer motor: Driving 0 V - Battery voltage
46 (B) Ground Transfer control actuator (GND) - Always 0 V
CAUTION: When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.
scientia non olet · About LEMON Manuals