DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- CHECK DTC DETECTION
With CONSULT
- Turn the ignition switch OFF to ON.CAUTION: Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
- Perform self-diagnosis for "CHASSIS CONTROL".
Is DTC "C1BBC-00" detected?
YES
Proceed to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END
- Turn the ignition switch OFF to ON.