VR30DDTT engine

CAUTION: Never reset data except when changing engine oil.

NOTE: Data cannot be reset until the vehicle travels 10 km (6.2 mile) from the previous data reset.

START
1. Turn ignition switch ON.
2. Check information display of the combination meter.
Is Distance to Engine Oil Change displayed?

YES

GO TO 3.

NO

GO TO 2.
SELECT OIL CONTROL SYSTEM MODE
Push the Display next switch and select oil control system mode.

GO TO 3.
RESET ENGINE OIL DATA
1. Press and hold the Display Next switch at least 1 second while Distance to Engine Oil Change is displayed.
2. Stop pressing the Display Next switch, and a few seconds later, check that the value of Distance to Engine Oil Change is reset.
END