Outline Of Radar Alignment Procedure

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

A 4-wheel vehicle alignment must be performed before proceeding with radar alignment procedure.
Always perform the radar alignment after removing and installing or replacing the ICC sensor.

WARNING: Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use.

CAUTION: The system does not operate normally unless the radar alignment is performed. Always perform it.

Set the distance sensor target board (SST: KV99112700) to the correct position in front of the vehicle.
Set the radar alignment mode ("MILLIWAVE RADAR ADJUST" on "Work support") with CONSULT, and then perform the adjustment according to the display. (ICC sensor automatically adjusts.)