LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2020 >> Q60 Pure, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTCS) (2 Of 3) >> EPS/DAST 3 (Steering Force Control Module) >> DTC C13F1-00: INCOMP St ANG Sen ADJST >> DTC Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Diagnosis Procedure

  1. PERFORM CALIBRATION 

    Perform the working including "DAST CALIBRATION (MODE1)" performed just before from the first. Refer to Work Procedure .

    GO TO 2.

  2. ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION 

    Adjust neutral position of steering angle sensor. Refer to Work Procedure .

    GO TO 3.

  3. PERFORM SELF-DIAGNOSIS 

    SYMBOL With CONSULT

    1. Turn the ignition switch ON.
    2. Erase self-diagnosis for "EPS/DAST 3".
    3. Turn the ignition switch OFF and wait for at least 10 seconds.
    4. Turn the ignition switch ON.
    5. Perform self-diagnosis for "EPS/DAST 3".

    Is DTC "C13F1-00" detected?

    YES

    Replace steering force control module. Refer to STEERING FORCE CONTROL MODULE : Removal & Installation .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals