LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2020 >> Q60 Pure, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (Diagnostics) >> Component Parts /Circuit Diagnosis >> Power Supply And Ground Circuit (Power Steering Control Module) >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK THE GROUND CIRCUIT 
    1. Turn the ignition switch OFF.
    2. Disconnect power steering control module harness connector.
    3. Check the continuity between power steering control module harness connector and ground.

      Power steering control module

      --

      Continuity

      Connector

      Terminal

      E177

      1

      Ground

      Existed

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Repair open circuit in harness or connectors.

  2. CHECK THE BATTERY POWER SUPPLY CIRCUIT (1) 

    Check the voltage between power steering control module harness connector and ground.

    Power steering control module

    --

    Voltage

    (Approx.)

    Connector

    Terminal

    E177

    2

    Ground

    10.5 - 16 V

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    GO TO 3.

  3. CHECK THE BATTERY POWER SUPPLY CIRCUIT (2) 
    1. Check the 100A fusible link (#J).
    2. Check the harness for open or short between power steering control module harness connector No. 2 terminal and the 100A fusible link (#J).

    Is the inspection result normal?

    YES

    Perform the trouble diagnosis for battery power supply circuit.

    NO

    Repair or replace error-detected parts.

  4. CHECK THE IGNITION POWER SUPPLY CIRCUIT (1) 
    1. Check the voltage between power steering control module harness connector and ground.

      Power steering control module

      --

      Voltage

      (Approx.)

      Connector

      Terminal

      E176

      4

      Ground

      0 V
    2. Turn the ignition switch ON.
    3. Check the voltage between power steering control module harness connector and ground.

      Power steering control module

      --

      Voltage

      (Approx.)

      Connector

      Terminal

      E176

      4

      Ground

      10.5 - 16 V

    Is the inspection result normal?

    YES

    GO TO 6.

    NO

    GO TO 5.

  5. CHECK THE IGNITION POWER SUPPLY CIRCUIT (2) 
    1. Turn the ignition switch OFF.
    2. Check the 10A fuse (#12).
    3. Check the continuity between power steering control module harness connector and fuse block (J/B) harness connector.

      Power steering control module

      Fuse block (J/B)

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      E176

      4

      E65

      11F

      Existed
    4. Check the continuity between power steering control module harness connector and ground.

      Power steering control module

      --

      Continuity

      Connector

      Terminal

      E176

      4

      Ground

      Not existed

    Is the inspection result normal?

    YES

    Perform the trouble diagnosis for ignition power supply circuit.

    NO

    Repair or replace error-detected parts.

  6. CHECK TERMINAL 
    1. Check the power steering control module pin terminals for damage or loose connection with harness connector.
    2. Check the fuse block (J/B) pin terminals for damage or loose connection with harness connector.

    Is the inspection result normal?

    YES

    Power steering control module is malfunctioning. Replace steering gear assembly. Refer to STEERING GEAR AND LINKAGE : Removal & Installation .

    NO

    Repair or replace error-detected parts.

scientia non olet · About LEMON Manuals