LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2020 >> QX50 Autograph, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> System Description >> Diagnosis System (Electric Shift Control Module) >> CONSULT Function >> Self Diagnostic Results
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Self Diagnostic Results

Display Item List 

Refer to DTC Index .

How to Read DTC 

DTC is displayed on "Self Diagnostic results" of CONSULT.

When DTC is currently detected, "CRNT" is displayed. If "PAST" is displayed, it shows a malfunction occurred in the past. The trip number of drive without malfunction of concerned DTC can be confirmed with "IGN counter" inside "FFD".

How to Erase DTC 

NOTE: If the ignition switch is left ON after repair, turn OFF the ignition switch and wait for 10 seconds or more. Then, turn the ignition ON again. (Engine stop)
  1. Touch "SHIFT" of CONSULT.
  2. Touch "Self Diagnostic Result".
  3. Touch "Erase". (DTC memorized in electric shift control module is erased.)

Freeze Frame Data (FFD) 

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.

Monitored item

Displayed contents

ODO/TRIP METER

Displays the mileage at the time the malfunction is detected.
scientia non olet · About LEMON Manuals