DTC Confirmation Procedure

If DTC Confirmation Procedure has been previously conducted. always perform the following procedure before conducting the next test.

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Check DTC.

GO TO 2.

1. Turn ignition switch ON and wait at least 10 seconds.
2. Check DTC.

Is 1st trip DTC detected?

YES

Proceed to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident

NO

Confirmation after repair: INSPECTION END