DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one based on the priority as per the following list.
|
Priority |
Detected items (DTC) |
Reference |
|
1 |
U0101-00 LOST COMM TCM |
|
|
U0115-00 Lost communication (ECM/PCM B) |
||
|
U1000-00 CAN COMM CIRCUIT |
||
|
U1086-00 CAN ERROR |
||
|
U2141-00 CAN comm err (TCM) |
||
|
2 |
P0701-00 Transmission control system |
|
|
P072A-00 Stuck in neutral |
||
|
3 |
P0780-00 SHIFT ERROR |
|
|
P07ED-00 T/M range multi-function select |
||
|
P18AC-00 PARKING ACTUATOR RELAY A |
||
|
4 |
P0571-00 BRAKE SWITCH A |
|
|
P0604-00 Control module RAM |
||
|
P0605-00 Control module ROM |
||
|
P0606-00 Control module |
||
|
P0607-00 Control module |
||
|
P060C-00 Control module main processor |
||
|
P062F-00 Control module EEPROM |
||
|
P06B1-00 Sensor power supply A |
||
|
P07EC-00 TRANSMISSION RANGE SENSOR A |
||
|
P07EE-00 T/M range multi-function select |
||
|
P07EF-00 T/M range multi-function select |
||
|
P07F2-00 T/M range control module (CAN) |
||
|
P0915-00 Gear shift position |
||
|
P0919-00 Gear shift position |
||
|
P1722-00 VHCL_SPEED_SEN |
||
|
P1894-00 ASIC |
||
|
P189D-00 BACK UP VOLTAGE |
||
|
P18A8-00 P range switch |
||
|
P18AB-00 IGNITION SWITCH |
||
|
P18E0-00 CVT output rev speed |
||
|
P272A-00 T/M range select motor |
||
|
P272B-00 T/M range select motor |
||
|
P272C-00 Park pawl motor |
||
|
P272D-00 Park pawl motor |