Work Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1
1. Turn ignition switch ON.
2. Operate power window switch to fully open the window.
3. Hold the window up switch UP until it completely closes. After the glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
4. Check that AUTO-UP function operates normally.
GO TO 2.
STEP 2
Check anti-pinch function. Refer to Work Procedure .

Inspection End.