Component Inspection

1. Turn ignition switch OFF.
2. Disconnect EOP sensor harness connector.
3. Check resistance between EOP sensor connector terminals.

   +	-	Condition	Resistance (k Ohm)
   EOP sensor
   Terminal
   1	2	None	4 k Ohm- 10 k Ohm
   	3		2 k Ohm- 8 k Ohm
   2	1		4 k Ohm- 10 k Ohm
   	3		1 k Ohm- 3 k Ohm
   3	1		2 k Ohm- 8 k Ohm
   	2		1 k Ohm- 3 k Ohm

Is the inspection result normal?

YES

INSPECTION END.

NO

Replace EOP sensor. Refer to OIL PAN (UPPER) : Exploded View .