LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio, Visual & Navigation System (Diagnostics) (1 Of 2) >> Basic Inspection >> INFINITI InTouch >> Configuration (Av Control Unit) >> Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

  1. WRITING MODE SELECTION 

    SYMBOL CONSULT Configuration

    Select "Re/programming, Configuration" of "MULTI AV".

    When writing saved data

    GO TO 2.

    When writing manually

    GO TO 3.

  2. WRITING VEHICLE SPECIFICATION 

    SYMBOL CONSULT Configuration

    Select "Configuration" or "After Replace ECU", and write the vehicle specification saved in CONSULT to AV control unit.

    CAUTION: Do not perform any operation such as the navigation operation during configuration writing.

    GO TO 4.

  3. WRITE VEHICLE SPECIFICATION 

    SYMBOL CONSULT Configuration

    1. Select "Re/programming, Configuration" of "MULTI AV".
    2. Select "Manual Configuration", and write the setting value as shown in the following table to AV control unit according to the vehicle specification.
    CAUTION: Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifications are misread.
    NOTE:
    • The items shown in this list depend on vehicle specifications.
    • The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
    • If selection items are not displayed on the CONSULT screen, touch "NEXT".

    MANUAL SETTING ITEM

    Detail

    Items

    Setting value

    NAVIGATION

    WITH

    Models with navigation system

    WITHOUT

    Models without navigation system

    SOUND SYSTEM

    BOSE

    Models with BOSE audio

    NORMAL 6SPKS

    Models without BOSE audio

    CAMERA SYSTEM

    NONE or AVM ph3

    Models with around view monitor system

    REAR

    Models with rear view monitor system

    HYBRID

    Off

    Models with gasoline engine

    FR TYPE

    Models with hybrid

    FR TYPE 4WD

    Models with hybrid (4WD)

    SONAR TYPE

    None

    Models without sonar

    FRONT&REAR

    Models with sonar

    DAB FUNCTION

    WITH

    Not applicable

    WITHOUT

    Applicable

    ENGINE TYPE 3

    2.0 LITER

    2.0 liter engine models

    3.5 LITER

    3.5 liter engine models

    3.7 LITER

    3.7 liter engine models

    GRADE

    MODE 1

    Except VR30DDTT engine (2WD) with paddle shifter models

    MODE 2

    VR30DDTT engine (2WD) with paddle shifter models

    PREDICTIVE COURSE LINE

    Without or with (with AVM)

    Models with around view monitor or models without camera

    With (Rear view camera with SBW)

    Models with rear view monitor (with direct adaptive steering)

    With (Rear view camera without SBW)

    Models with rear view monitor (without direct adaptive steering)

    FEB SYSTEM

    OFF

    Without (Forward emergency braking system)

    ON

    With (Forward emergency braking system)

    GO TO 4.

  4. PERFORM SELF-DIAGNOSIS 

    SYMBOL CONSULT Self Diagnostic Result

    Perform self-diagnosis of CONSULT, and check whether or not DTC B1341-55 is detected.

    Is DTC B1341-55 detected?

    YES

    GO TO 1.

    NO

    GO TO 5.

  5. OPERATION CHECK 

    Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.

    YES

    WORK END

scientia non olet · About LEMON Manuals